Khawaja Freed University of Engineering & Information Technology, Rahim Yar Khan

Khawaja Freed university enhance the technological needs.

  • Khawaja Freed University of Engineering & Information Technology, Rahim Yar Khan
  • +92 68 9239121/9239122
  • [email protected]
  • http://www.kfueit.edu.pk/

Description

INTRODUCTION:

Rahim Yar Khan is located in Southern Punjab and is a major city and industrial hub of the region. This region of Punjab is bordered by areas of Balochistan and Sindh that are similarly deprived in terms of facilities for higher education in science and technology. For decades, students from the region had to travel hundreds of miles to get engineering and technology education, even when they would be lucky enough to get admission in the face of high competition on limited seats in the public sector engineering universities of the province. Hence, establishment of an Engineering University in the city had been a long standing demand of the people of Rahim Yar Khan. Successive governments, over the years, had been making unfulfilled promises on this account. However, Mian Muhammad Shahbaz Sharif, Chief Minister of Punjab, being a man of action and not mere words, fulfilled this demand on 22 April 2014 by laying the foundation of Khwaja Fareed University of Engineering & Information Technology on Abu Dhabi Road, Rahim Yar Khan. The Government of Punjab started out by providing 220 Acres of land and thereafter through the involvement of the University of Engineering & Technology, Lahore under the dynamic leadership of its then Vice Chancellor, Lt. Gen. (Retd.) Akram Khan, a PC-1 of Rs. 3,847 Million was prepared and subsequently approved by the Planning & Development Board, Punjab for the Establishment of Khwaja Fareed University of Engineering & Information Technology, Rahim Yar Khan. M/S NESPAK, the world renowned National Engineering Services of Pakistan, were engaged as Consultants for Engineering Design and Resident Engineering Supervision for Campus Construction.

The Khwaja Fareed University of Engineering & Information Technology, Rahim Yar Khan Act (Act XVI of 2014) was passed by the Punjab Assembly on 29 May 2014 to provide the legal foundations and framework for the University. Classes were started in four rented classrooms of the Government College of Technology, Shehbazpur Road, some 18 kms away from the actual campus site, on 1 September 2014 for a batch of 200 students equally divided in the four disciplines of Mechanical Engineering, Electrical Engineering, Computer Science and Information Technology.

The first duly appointed Vice Chancellor of the University, Engr. Prof. Dr. Athar Mahboob, Tamgha-e-Imtiaz joined on 2 September 2015. Dr. Athar Mahboob started fast track execution of the project by shifting classes and administration to University’s own campus on Abu Dhabi Road in few renovated buildings. After due process of following PPRA regulations several contracts for construction of buildings and infrastructure development have already been awarded. Remaining contracts are in the process of award before the end of the year. First meeting of the duly constituted Syndicate of the University was held on 19 May 2016. The Syndicate while approving the Annual Report and the Budget Estimates expressed its satisfaction over the rapid progress being made for establishment of the University under the able leadership of its Vice Chancellor, Engr. Prof. Dr. Athar Mahboob and assured of its fullest cooperation and support.

 

Admission Process

 

Admission Rules & Regulations

1.

General Instructions

     

a) Designated Members of the University staff will be available for personal consultation during admission period.

b) Try to submit the application along with the required documents as early as possible. Do not wait for the last date.

c) As soon as the process of selection is complete, the merit list will be notified showing the percentage aggregate marks of the applicants admitted in different disciplines against different categories.

d) All documents to be attached with the application Form-I should be attested by a Class-I Gazetted officer of the government or Class – A officer of the University.

2.

Equivalent Examinations

The University recognizes the following examinations as equivalent to the Intermediate (Pre-Engineering) examination with Mathematics, Physics and Chemistry of the Pakistani Boards of Intermediate and Secondary Education:

  1. Intermediate (Pre-Engineering) Examination of the Board of Intermediate & Secondary Education, Azad Kashmir.

  2. Cambridge Overseas Higher School Certificate with Physics, Chemistry and Mathematics.

  3. British General Certificate of Education (Advanced Level) with Physics, Chemistry and Mathematics.

  4. F.Sc. (Pre-Medical) with Mathematics as an additional subject.

  5. American High School Graduation Diploma (12th Grade) or equivalent.

2.1 Equivalence of Certificates Up to Higher Secondary School Certificate (HSSC)/ Intermediate Level

The determination of equivalence and issuance of equivalent marks certificate up to HSSC level for certificates other than those issued by Pakistan's Boards is the jurisdiction of the Inter Board Committee of Chairmen (IBCC) as per decision of the Supreme Court of Pakistan. Such applicants are required to attach an equivalence certificate showing marks with the application for admission issued by the IBCC. The following are the addresses of the IBCC offices: IBCC Regional Office at BISE Building, 86 Mozang Road, Lahore

3.

Eligibility for Admission

3.1 For Engineering Programs:

An applicant for admission to any of the Engineering Bachelor Degree Program offered by the University must fulfill the following requirements:

  1. He should have obtained at least 60% marks in B.Sc. examination excluding sports and Hafiz-e-Quran marks.

  2. He should have appeared in Engineering College Admission Test (ECAT)/KFUEIT Entry Test for that particular academic session (when conducted) in which he seeks admission.

  3. He should meet standards of physique and eye sight laid down in the medical Certificate. (Form II).

3.2 For CS & IT Program:

An applicant for admission to CS or IT Bachelor Degree Program offered by the University must fulfill the following requirements:

  1. He should have obtained at least 50% marks in F.Sc(Pre-Engineering)/ICS/DAE/B.Sc. examination excluding sports and Hafiz-e-Quran marks.

  1. He should have obtained at least 40% marks in National Aptitude Test (NAT)/ KFUEIT Entry Test for that particular academic session (when conducted) in which he seeks admission.

  1. He should meet standards of physique and eye sight laid down in the medical Certificate. (Form II).

3.3 General Eligibility Requirements for Admission in following Graduate Programs

3.3.1 MSc Chemistry

BSc with Chemistry, Botany & Zoology

BSc with Chemistry, Physics & Mathematics.

BSc with Chemistry, Physics & Statistics.

3.3.2 MSc Physics

BSc with Physics, Mathematics (General) and Chemistry.

BSc with Physics, Mathematics (General) and Statistics.

BSc with Physics, Mathematics (General) and Space Science.

BSc with Physics, Mathematics (General) and Geology.

BSc with Physics, Mathematics (General) and Geography.

BSc with Physics, Mathematics (General) and Applied Psychology/Psychology.

BSc with Physics, Mathematics A course and Mathematics B. Course.

BSc with Physics, Mathematics (General) and Computer Studies.

3.3.3 MSc Mathematics

BSc with Mathematics A Course\Mathematic B. Course and Space Science.

BSc with Mathematics A Course, Mathematics B Course and Physics.

BSc with Mathematics A Course, Mathematics B Course and Economics.

BSc with Mathematics A Course, Mathematics B Course and Computer Studies.

BSc with Mathematics A Course, Mathematics B Course and Statistics.

3.3.4 MCS (Master in Computer Science)

B.com/B.Sc. with Mathematics or Statistics or Computer Science.

Associate Degree Program (ADP) in Computer Sciences.

Note: Candidates should have at least 45% marks in B.Sc. for admission in any graduate program.

3.4 Provisions about Admission Requirements/Eligibility Criteria

Given the qualifications and restrictions stated below, a person is eligible for admission to the Bachelor's degree courses at the University on the basis of a degree of Intermediate, subject to fulfilling of General Eligibility Criterion stated in Clause 3 and subject to the condition that he has passed F.Sc. Pre-Engineering or F.Sc. Pre-Medical examination.

3.4.1 Scope of Eligibility for B.Sc.'s with F.Sc. (Pre-Engineering)

For admission to the B.Sc. degree courses in Engineering, Computer Science and Information Technology an applicant must have passed the B.Sc. examination with Physics and Mathematics.


 

3.4.2 Scope of Eligibility for B.Sc.'s with F.Sc. (Pre-Medical)

For admission to the B.Sc. degree courses in Engineering, Computer Science and Information Technology an applicant must have passed the B.Sc. examination with Physics and Mathematics.

3.5 Seats for Diploma Holders

a) For admission against seats reserved for the holders of Diploma of Associate Engineer, the candidate should have passed diploma examination of a Board of Technical Education in the relevant technology

b) Applicants seeking admission against seats reserved for the holders of Diploma of Associate Engineer shall not be eligible unless their diplomas are in the relevant technology as specified against each degree course given below:

B.Sc. Electrical Engineering

  • Diploma in Electrical Technology.

  • Diploma in Telecommunication Technology.

  • Diploma in Electronics Technology.

  • Diploma in Avionics Technology.

  • Diploma in Instrumentation Technology.

  • Diploma in Information Technology.

  • Diploma in Precision Mechanical & Instrument Technology.

 

B.Sc. Mechanical Engineering Technology

  • Diploma in Mechanical Technology (with any specialization).

  • Diploma in Precision Mechanical & Instruments Technology.

  • Diploma in Auto & Diesel Technology.

  • Diploma in Bio-Medical Technology.

  • Diploma in Dies & Mould Technology.

  • Diploma in Automation Technology.

  • Diploma in Refrigeration & Air Conditioning Technology.

  • Diploma in Foundry & Pattern Making.

  • Diploma in Metallurgy & Welding Technologies.


 

Explanation

A candidate having diploma in any other technology shall not be eligible for admission.

4.

Age Limit

There is no age restriction for seeking admission to any Bachelor's degree course at the University.

5.

Applicant's Gender

Both male and female persons are eligible to apply for all seats.

 

Programs


 

Fees Structure

FEE STRUCTURE AND OTHER CHARGES

General Dues for BS(CS), BS(IT), BS(ME) and BS(EE)

Sr no

Fee Type

Amount

Remarks

1

Admission Fee

5,000/

Once only at the time of admission (non-refundable)

2

Security Deposite

5,000/

Once only at the time of admission (refundable)

3

Tution Fee

10,000/

Per Semester

4

Semester Charges

3,500/

Per Semester

5

Transport Charges

2,500/

Per Semester

 

Total

26,000/

 

General Dues for Master in Chemistry, Physics, Mathematics and Computer Science

Sr no

Fee Type

Amount

Remarks

1

Admission Fee

5,000/

Once only at the time of admission (non-refundable)

2

Security Deposite

5,000/

Once only at the time of admission (refundable)

3

Tution Fee

25,000/

Per Semester

4

Semester Charges

3,500/

Per Semester

5

Transport Charges

2,500/

Per Semester

 

Total

41,000/

 

Hostel Fee

Sr no

Fee Type

Amount

Remarks

1

Hostel Fees

7,000/

Per Semester

2

Hostel Security Deposit

3,000/

Once only at the time of admission (refundable)

Other Fees / Charges

Sr no

Fee Type

Amount

Remarks

1

Readmission / Freeze Semester

5,000/

At the time of Re-admission / Freeze

2

Late Fee Payment Fine

50/

Per Day

3

Subject Improvement or Repeat

1,000/

Per Credit Hour